The XC6237 series is a CMOS process high-speed LDO regulator IC that achieves low current consumption, high accuracy, and high ripple rejection.

Torex has now developed charging regulator ICs and battery voltage monitoring ICs which allow constant-voltage (CV) charging of 2.3V-type lithium secondary batteries.

The XD9707/XD9708 series consists of ultra-compact DC/DC converters developed with the intention to replace such applications where regulators were used as power supply I

The XC9267/68 is a synchronous step-down DC/ DC with P-Ch High Side Switch to ensure low voltage operation with 100% max duty ratio.

By adding an oscillation frequency of 4 MHz, higher efficiency can be achieved while still maintaining the mounting area as compared with the oscillation frequency of 6 M

The switching frequency is 2.2MHz and the operating ambient temperature range is -40°C ~ 105°C. Thermal shutdown, power good, integral soft-start and a built-in UVLO fu

The XC9276 Series is an ultra-low power 150mA step-down synchronous DC/DC converter which has an output voltage select function (VSET) that enables two separate voltages

The XC6240 has a fixed VOUT of 2.63V ± 1.5% specifically for NGK’s EnerCera products. The LDO Voltage Regulator typically consumes 0.8µA when operating and sinks only 0

The XC6140 series are battery voltage monitoring ICs optimal to CV rechargeable batteries and electric double layer capacitors.

The XC6705 is available in the SOT-25 & USP-4 packages and the XC6706 is available in a SOT-89-3 package.

The XCL232 can operate from 1.8V~6.0V and deliver loads up to 150mA. Output voltage is selectable within a range of 0.5V~3.6V.

The XC8110/11 are load switch IC with ideal diode functionality that also features chip enable (CE), over current limit, inrush current limit and thermal shutdown.

Battery Over Discharge Protection, Output Terminal Short Protection, and Battery Voltage Monitor or Battery Low Voltage Notification functions are included to create an u

The newly launched XC9141/XC9142 series of 0.8A step-up DC/DC converters with a load disconnection function are ideal power ICs for home healthcare and wearable devices

The XCL223/XCL224 series are ultra-small (external dimensions: 2.25mm x 1.5mm x h0.75mm) step-down micro DC/DC converters with an integrated coil and control IC.